Table of Contents
Advertisement
Utilities
Utilities
settings primarily control the instrument's interaction with other devices/systems.
Preferences
settings, on the other hand, tend to control the appearance and performance of the X-
Stream application. Use these settings to personalize the behavior of the instrument.
Disk Utilities
enable you to perform commonplace Windows file functions. They are also accessible
from the File menu.
Utilities
To access the Utilities dialogs, choose Utilities > Utilities Setup... from the menu bar.
HardCopy
Setup,
Date/Time
do the tabs.
There are also tabs linking to
Note: Hardcopy Setup controls the behavior of the Print function. The selected print output
device or application is displayed to the right of the HardCopy Setup button for convenience.
Show Windows Desktop minimizes the X-Stream application window. Maximize the application by
touching the display icon located at the lower-right of the desktop.
Touch-Screen Calibration
through a series of actions to improve the precision and accuracy of the touch screen.
The Service button to the far right of the dialog launches a section of the application reserved for
qualified Teledyne LeCroy service personnel. An access code is required to enter this section.
Status
The Utilities Status dialog displays information about your instrument including model number, serial
number, firmware version, and installed hardware and software options.
Choose Utilities > Utilities Setup from the menu bar, then touch the Status tab.
Or
Choose Support > About from the menu bar.
Setup, and
System Status
Remote
Control,
launches a sequence of display calibration screens. You will be prompted
buttons open their corresponding dialogs, as
Auxilliary
Output, and
Options
settings.
Utilities
149
Advertisement
Table of Contents
