Front Panel Display - Rice Lake IQ plus 710 Installation Manual

Discontinued Product
1.2

Front Panel Display

Figure 1-1 shows the IQ plus 710 front panel keys and
the key functions assigned in normal mode.
The IQ plus 710 display is divided into three areas
(see Figure 1-2):
• The primary display consists of seven large,
14-segment digits used to display weight data.
• A two-digit annunciator shows the units
associated with the displayed value: lb=pounds,
kg=kilograms, oz=ounces, T=short tons,
t = m e t r i c t o n s , LT = l o n g t o n s , g = g r a m s ,
GN=grains. When the units configured are troy
pounds or troy ounces, the word
in the secondary display area in addition to the
lb oz
or annunciator. The units can also be set to
NONE (no units information displayed).
2 IQ plus 710 Installation Manual
N
Figure 1-1. IQ plus 710 Front Panel
troy
is shown
Figure 1-2. IQ Plus 710 Front Panel Display Areas
• The two-digit annunciator also displays
whether the indicator is in numeric entry (NE)
o r a l p h a e n t r y ( A E ) m o d e f o r s o m e
operations.
The 16-digit secondary display is used to display the
weighing mode (Gross/Brutto or Net) and status
indicators, including standstill (
zero ( ).
The symbols shown over the keys in Figure 1-1
(representing up, down, enter, left, right) describe the
key functions assigned in setup mode. In setup mode,
the keys are used to navigate through menus, select
d i g i t s w i t h i n n u m e r i c
increment/decrement values. See Section 3.1.3 on
page 15 for information about using the front panel
keys in keys in setup mode.
) and center of
v a l u e s , a n d