Rice Lake IQ plus 710 Installation Manual page 35

D
VALUE
0–65535
Discontinued Product
SETPTS Menu
Parameter Choices
Level 2 submenus
SETPT1–SETPT8 OFF
GROSSSP
NETSP
+RELSP
–RELSP
%RELSP
PAUSE
DELAY
WAITSS
COUNTER
AUTOJOG
COZ
INMOTON
INRANGE
–GROSS
–NET
BATCHPR
TIMER
CONCUR
BATCHNG OFF
AUTO
MANUAL
TIMER and CONCUR Setpoints
START
END
1–20 1–20
Figure 3-14. Submenu for TIMER and CONCUR Setpoints
Specifies the setpoint kind.
GROSSSP, NETSP, +RELSP, –RELSP, and %RELSP setpoint kinds can be used as
either batch or continuous setpoints.
PAUSE, DELAY, WAITSS, COUNTER, and AUTOJOG setpoint kinds can only be
used in batch sequences.
COZ, INMOTON, INRANGE, –GROSS, –NET, BATCHPR, TIMER, and CONCUR
setpoint kinds can only be used as continuous setpoints.
See Table 8-1 on page 56 for more information about setpoint kinds.
Batching enable. Set to AUTO or MANUAL to allow a batch sequence to run.
MANUAL requires a BATSTRT digital input, BATSTART EDP command, or STRTBAT
macro configuration before the batch sequence can run. AUTO allows batch
sequences to repeat continuously.
ACCESS
NAME
ON NONE
HIDE 1–60
OFF
Description
DIGOUT
NONE
1–8
Configuration 31