Table of Contents
Advertisement
1.3
Front Panel Description
The MSI-8000 front panel, keys and annunciators, are described in Table 1-1.
1.3.1
Key/Annunciator Functions
Item
No.
1
Function 1 Key – programmable to user selectable functions, see Section 4.2 on page 9. Default is Off.
Functions as the Enter/Select key when in the setup menus.
2
Function 2 Key – programmable to user selectable functions, see Section 4.2 on page 9. Default is Off.
Functions as the Scroll key in the setup menus.
3
Function 3 Key – pre-programmed to Print and cannot be changed.
4
Center of Zero — indicates that the scale/Dyna-Link is within 1/4 d of zero
5
Standstill — indicates that the load has settled within the motion window (usually ± 1d). When this symbol is off, the
scale/Dyna-Link will not zero, tare or totalize.
6
LED Functions — Indicates the current displayed function. Example: if F1 blinks, the peak hold reading is captured. If F2 blinks,
the Display and Function Test reading is captured.
7
Total – indicates the RF linked device is displaying the total accumulated weight. Displays only momentarily.
Peak – indicates the RF linked device is in the peak hold mode.
Net – indicates the RF linked device is in Net load mode. A tare weight is subtracted from the gross load.
Metric Ton – in conjunction with the Ton annunciator, indicates the RF linked device is displaying Metric Tons.
Ton – illuminated, indicates the RF Linked Device is displaying in U.S. Short Tons (1 ton = 2000 lb.).
When illuminated with M the RF Linked Device is displaying in Metric Tons (1 metric ton = 1000 kg)
Kilonewtons – indicates load display is in kilonewtons.
Kilograms – indicates load display is in kilograms.
Pound – indicates load display is in pounds.
8
Setpoints — user programmable setpoints for overload warnings. Setpoints 1 and 2 are red high brightness LEDs
9
Multiple sensors — number lit indicates the sensor being displayed. If more than one number is lit, sensors are being
summed. Example: if both numbers 1 and 2 are lit, then the weight displayed equals the sum of sensor 1 and sensor 2.
10
Display Digits — include six 1.22'' (31 mm) sunlight visible LCD's.
11
Power Key – powers the unit on and off; in setup mode, it returns the display to the weigh mode without storing changes.
12
Zero Key – zeros the residual load on a scale/Dyna-Link 2; In setup mode, it stores changes and returns to the prior level.
13
Tare Key – removes current load value and puts the system into Net weight mode
14
Low Battery – indicates about 10% of battery life remains; symbol flashes when automatic shutdown is eminent
6
5
4
3
2
1
Figure 1-1. MSI-8000 Front Panel
Table 1-1. Keypad/Annunciator Functions
8
7
9
10
14
TM
Description
11
12
13
Introduction
3
Advertisement
Table of Contents
