Operation; Front Panel Display - Rice Lake LaserLight3 Series Technical Manual

LaserLight3 Remote Display
3.0

Operation

The front panel consists of two combined LED displays and a keypad.
3.1

Front Panel Display

The LaserLight3 provides status information about the weight value displayed. The LaserLight3 also has arrows and traffic lights
that can be displayed with serial commands
Item
Traffic Symbols
Weight Value
>0<
→0←
GR
NT
lb
kg
oz
g
tn
T
G
NOTE: The layout of annunciators and size of weight digits vary depending on which Type option is configured in the
Display menu: Legacy provides about 3.75 inch weight digits with annunciators along the bottom while Standard provides
about 5 inch weight digits with annunciators along the right side.
28 Visit our website
(Section 4.5.2 on page
Figure 3-1. Front Panel Display
Red stop light, red x, green go light, and green up arrow, green left arrow, green right arrow
Displays weighment data
The center of zero annunciator indicates that the current gross weight reading is within ± 0.25 display divi-
sions of the acquired zero, or is within the center of zero band. A display division is the resolution of the
displayed weight value, or the smallest incremental increase or decrease which can be displayed or
printed
The standstill annunciator indicates the weight is at standstill or within the specified motion band. Some
operations, including zero, tare and print, can only be done when the standstill annunciator is displayed
Displays which weight display mode is active, GR (Gross) or NT (Net)
The current unit displays at the right side of the numeric weight area and specifies which unit of measure is
being used. Indicates units associated with the displayed value, represents primary and secondary units
such as lb, kg, g, oz, tn and T
Table 3-1. Front Panel Descriptions
www.RiceLake.com
51).
Description