Rice Lake IQ plus 710 Installation Manual page 31

PROGRM Menu
Parameter Choices
PROMPTS PROMPT1–
PROMPT60
MACRO1 STRTBAT
MACRO2 EDIT
MACRO3
MACRO4
REGULAT NTEP
OIML
NONE
Discontinued Product
CANADA
REGWORD GROSS
BRUTTO
NEGNET ON
OFF
Level 3 submenus
DATEFMT MMDDYY
DDMMYY
YYMMDD
DATESEP SLASH
DASH
SEMI
DOT
TIMEFMT 12HOUR
24HOUR
TIMESEP COLON
COMMA
Specify prompts for use in macros and setpoint names. Prompts are referenced by the NAME
parameter under the MACRO and SETPTS submenus; prompts appear in the secondary
display area during macro and setpoint execution.
Specify MACROs 1–4. The STRBAT parameter can be set on to start a batch sequence on
completion of the macro; the EDIT parameter contains up to 30 macro steps, including
simulated keystrokes and pause/release conditions. See Section 9.0 on page 60 for more
information about configuring macros.
Regulatory mode. Specifies the regulatory agency having jurisdiction over the scale site.
• OIML, NTEP, and CANADA modes allow a tare to be acquired at any weight greater than
zero. NONE allows tares to be acquired at any weight value.
• OIML, NTEP, and CANADA modes allow a tare to be cleared only if the gross weight is at
no load. NONE allows tares to be cleared at any weight value.
• Streamed output in OIML, NTEP, and CANADA modes follows the display update rate. In
NONE mode, streamed output follows the A/D update rate.
• NTEP and OIML modes allow a new tare to be acquired even if a tare is already present.
In CANADA mode, the previous tare must be cleared before a new tare can be acquired.
• NONE, NTEP and CANADA modes allow the scale to be zeroed in either gross or net
mode as long as the current weight is within the specified ZRANGE. In OIML mode, the
scale must be in gross mode before it can be zeroed; pressing the ZERO key in net mode
clears the tare.
• OIML mode replaces the Gross annunciator with Brutto.
The value specified for this parameter affects the function of the front panel TARE and ZERO
keys. See Section 10.3 on page 67 for a complete description of TARE and ZERO key
functions for each of the regulatory modes.
Selects the word to display for Gross Mode in NTEP or OIML
Allows the user to turn off the negative sign in loss-in-weight systems.
Specifies the format used to display or print the date.
Specifies the date separator character.
Specifies the format used to display or print the time.
Specifies the time separator character.
Table 3-6. Program Menu Parameters (Continued)
Description
Configuration 27