Rice Lake IQ plus 710 Installation Manual page 65

PROGRM Menu
Parameter Choices
Level 2 MACRO submenu
MACRO1 EDIT
MACRO2 STRTBAT
MACRO3
MACRO4
Level 3 MACRO submenu
EDIT macro sequence
STRTBAT OFF
Discontinued Product
ON
Level 4 MACRO submenu
STEP1 – KEY
STEP30 NAME
TIMEOUT
Level 5 MACRO submenu
KEY KEYPAD
PSEUDO
PAUSREL
NAME NONE
NAME1 – NAME60
TIMEOUT number
Level 6 MACRO submenu
KEYPAD OFF
ZERO
G/N
TARE
UNITS
PRINT
ID
SETPT
T/D
ESCAPE
ALPHA
ACCUM
DSPTAR
CLEAR
ENTER
0–9
DP
F1-F4
Configure macros
Create or display a macro sequence
Specifies whether a batch sequence is automatically started when the macro
sequence ends. STRTBAT=ON is functionally equivalent to the BATSTART EDP
command or the BATSTRT digital input.
Select macro step
Specifies whether the keystroke simulated by the macro is an actual keypad key, a
pseudo key, or a pause release.
Specifies the text, if any, shown on the secondary display during macro execution.
NAME1 through NAME60 are specified on the PROMPTS parameter.
If TIMER is specified for the PAUSREL parameter, specify a timer value in the range
0–65535, in 0.1-second intervals. For example, specify TIMER=150 to insert a
15-second pause.
Select front panel key simulated by this macro step.
Table 9-1. MACRO Submenu Parameters (PROGRM Menu)
Description
Macro Programming 61