Default Ticket Formats - Rice Lake IQ plus 710 Installation Manual

Command
<SPnn> Space (nn = number of spaces)*
<SU> Toggle weight data format (formatted/unformatted)**
NOTES:
Gross, net, and tare weights, SV1 setpoint weight are 9 digits in length, including sign (10 digits with decimal point), followed by
a space and a two-digit units identifier. Total field length with units identifier is 12 (or 13) characters.
TR1, TR2, and TR3 truck ticket weight data includes keywords INBOUND, KEYED, RECALLED, as necessary.
ID and consecutive number (CN) fields are 1–7 characters in length, as required.
Discontinued Product
ID numbers included in the print format string (<ID> command) must be set using the UID EDP command.
Ticket header (AE) inserts information specified for the HDRFMT header format.
* If nn is not specified, 1 is assumed. Value must be in the range 1–99.
** After receiving an SU command, the indicator sends unformatted data until the next SU command is received. Unformatted
data omits decimal points, leading and trailing characters.
NOTE: The <G2>, <N2>, and <T2> commands listed in Table 6-1 print the gross, net, and tare weights in non-displayed units—
that is, in the units not currently displayed on the indicator.
6.2

Default Ticket Formats

Table 6-2 shows the default print formats for the IQ plus 710 and lists the conditions under which each print
format is used. The HDRFMT format is used to specify header information that can be used by the other ticket
formats. The contents of the HDRFMT format can be inserted into any other ticket format using the <AE>
formatting command.
Format
GFMT GROSS<G><NL2><TD><NL>
NFMT GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N>
<NL2><ID><NL>
EDPFMT GROSS<G><NL2><TD><NL>
TRWIN <NL>ID<SP><ID><NL2>GROSS<TR1>
<NL2><DA><SP><TI><NL>
TRWOUT <NL6>ID<SP><ID><NL2>GROSS<TR1><NL>TARE<SP><TR2>
<NL>NET<SP2><TR3><NL2><DA><SP><TI><NL>
SPFMT <SV1><SP><SV2><NL>
HDRFMT COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST ZIP<NL2>
NOTES:
1. In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare weight.
2. For most applications, when using a printer attached to the EDP port, set PRNDEST (on the SERIAL menu) to EDP. If
PRNDEST=BOTH, only the EDP format is sent to the printer.
50 IQ plus 710 Installation Manual
Description
Table 6-1. Print Format Commands (Continued)
Default Format String
Table 6-2. Default Print Formats
Ticket Format
GFMT/NFMT/
EDPFMT TRWIN/TRWOUT
√ √
√ √
Used When
Normal mode, no tare in system
Normal mode, tare in system
Normal mode, PRNDEST=BOTH (SERIAL
menu). GFMT (or NFMT) print format is sent to
printer port simultaneously.
Truck mode (TARE100 ¦ OFF), when truck ID is
entered and NEWID key is pressed. See Note 2.
Truck mode (TARE100 ¦ OFF), when truck ID is
entered and PRINT key is pressed. See Note 2.
Setpoint push print operation (PSHPRNT=ON)
N/A
SPFMT
√
√