Rice Lake IQ plus 710 Installation Manual page 24

FORMAT Menu
Parameter Choices
Level 2 submenus
PRIMAR DECPNT
DSPDIV
UNITS
SECNDR DECPNT
DSPDIV
UNITS
MULT
Discontinued Product
DECFMT DOT
COMMA
DSPRATE 250MS
500MS
750MS
1SEC
1500MS
2SEC
2500MS
3SEC
4SEC
6SEC
8SEC
Level 3 submenus
Primary Units (PRIMAR Parameter)
DECPNT 8888888
8888880
8888800
8.888888
88.88888
888.8888
8888.888
88888.88
888888.8
DSPDIV 1D
2D
5D
UNITS LB
KG
G
OZ
TN
T
GN
TROYOZ
TROYLB
LT
NONE
20 IQ plus 710 Installation Manual
Specifies the decimal position, display divisions, and units used for the primary units. See
Level 3 submenu parameter descriptions.
Specifies the decimal position, display divisions, units, and conversion multiplier used for the
secondary units. See Level 3 submenu parameter descriptions.
Specifies whether decimal numbers are displayed using a period (DOT) or comma as the
decimal symbol.
Display rate. Sets the update rate for displayed values. Values are in milliseconds (MS) or
seconds (SEC).
Indicators programmed to run macros should set the display rate to 2SEC or faster.
NOTE:
Decimal point location. Specifies the location of the decimal point or dummy zeroes in the
primary unit display. Value should be consistent with local legal requirements.
Display divisions. Selects the minimum division size for the primary units displayed weight.
Specifies primary units for displayed and printed weight. Values are: LB=pound;
kg=kilogram; g=gram; OZ=ounce; TN=short ton; T=metric ton; GN=grain; TROYOZ=troy
ounce; TROYLB=troy pound; LT=long ton.
230 VAC indicators are configured with KG for both primary and secondary units.
NOTE:
Table 3-3. Format Menu Parameters
Description