Using The Truck Modes; Modes 1 And 2; Modes 3, 4, 5, And 6; Single-Transaction Tare Weights And Ids - Rice Lake IQ plus 710 Installation Manual

7.1

Using the Truck Modes

All the truck in/out modes let you search the memory
for a specific ID number. Information can be
displayed, cleared, or printed.
• To display a particular ID, key in the ID
number and press
number is in memory, it is displayed. If not,
the indicator displays
between the ID number and tare weight.
• If the ID number is not known, press
display the first available ID in the register,
then press
DISPLAY TARE
Discontinued Product
ID. Each time you press
next number appears on the display.
• To display all stored IDs, key in any ID
number and press
you press
DISPLAY TARE
appears on the display.
• To clear one or more truck IDs, display an ID
you want to delete, then press
indicator responds by prompting
To clear only the displayed ID, press
again. To clear all truck IDs, press
then press
CLEAR
is shown.
• To print all stored ID numbers and their
associated tare weights, press
ID number is on the screen.
7.1.1

Modes 1 and 2

In modes 1 and 2, the indicator erases truck ID
numbers and tare weights from memory after the
transaction.
1. The truck moves onto the scale for weigh-in.
2. If keyed tares are enabled (Mode 1), key in
the desired tare weight and press
3. Key in an ID number (up to 7 digits) and press
. This information remains in memory until
ID
the weigh-out ticket is printed.
4. The indicator prints the weigh-in ticket
(TRWIN format) shown below:
ID. NO. 304812
GROSS 15000. LB INBOUND
08/04/1998 10:24 AM
5. The loaded truck moves onto the scale for
weigh-out.
6. Key in the ID number from the weigh-in
ticket and press
weigh-out ticket (TRWOUT format) and
automatically clears the information from
memory: If the tare weight is a keyed tare, the
word is printed after
KEYED
tare line.
54 IQ plus 710 Installation Manual
. If the
DISPLAY TARE
. toggles
NO ID ENTER
ID
to display the next
DISPLAY TARE
. Each time
DISPLAY TARE
, the next number
. The
CLEAR
CLR REG??
CLEAR
ENTER
when the prompt
CLR ALL??
when an
PRINT
.
TARE
. The indicator prints a
PRINT
on the
RECALLED
7.1.2

Modes 3, 4, 5, and 6

In modes 3–6, the indicator stores the tare weights and
ID numbers in memory until you manually erase
them.
1. The truck moves onto the scale for weigh-in.
2. If keyed tares are enabled (Modes 3, 5), key in
the desired tare weight, then press
3. Key in an ID number (up to 7 digits) and press
. This information remains in memory until
I.D
manually deleted.
to
4. The indicator prints the weigh-in ticket
(TRWIN format). Truck leaves.
, the
5. The loaded truck moves back onto the scale
for weigh-out.
6. Key in the ID number and press
i n d i c a t o r p r i n t s t h e w e i g h - o u t t i c k e t
(TRWOUT format). If value swapping is
enabled (modes 3 and 4), the lower weight is
always printed as the tare weight.
ID. NO. 304812
GROSS 100000. LB
.
TARE
NET
,
08/04/1998 10:55 AM
7.1.3

Single-Transaction Tare Weights and IDs

Temporary tare weights are supported in all modes
that can be configured to use stored IDs (TARE100
modes 3–6). This function allows one-time weighing
of trucks without adding the truck ID and tare weight
to the indicator database.
To use this function, enter a truck ID containing a
decimal point, then press
IDs entered using decimal truck IDs are erased from
the indicator database when the transaction is
complete.
15000. LB RECALLED
85000. LB
Tare weights and Truck
ID.
.
TARE
. The
PRINT