Truck Modes - Rice Lake IQ plus 710 Installation Manual

7.0

Truck Modes

The truck in/out modes are used to handle multiple
truck ID numbers and tare weights. Six truck modes
combine stored ID, keyed tare, and value swapping
features in various ways:
Mode Stored IDs
MODE1 NO
MODE2 NO
MODE3 YES
Discontinued Product
MODE4 YES
MODE5 YES
MODE6 YES
OFF
Table 7-1. Truck Mode Features
let you keep a database of truck IDs and
Stored IDs
tare weights in the indicator's memory. The indicator
can automatically store up to 300 truck IDs and tares;
or it can clear the information after printing a
weigh-out ticket. For example, if the same truck
seldom crosses the scale, it may not be practical to
save its ID number and tare weight. However, if that
same truck crosses the scale many times each day, it's
much more convenient to store the information in the
indicator memory and recall it when needed. Stored
IDs and tare weights are available in Modes 3, 4, 5,
and 6.
PROGRM
TARE100
OFF MODE 1
Value
Keyed Tares Swapping
YES YES
NO YES
YES YES
NO YES
YES NO
NO NO
MODE 2 MODE 3
Figure 7-1. TARE100 Truck Mode Selections
allow you to manually enter the tare
Keyed tares
weight using the numeric keypad and the
Keyed tares are available in Modes 1, 3, and 5.
NOTE: Some local regulations require the tare weight to be
read from the scale. If so, don't use the keyed tares feature.
ensures that the lowest of two weight
Value swapping
values associated with a particular ID number is
entered as the tare weight. For example, if a truck
crosses the scale fully loaded at weigh-in, then
unloads and crosses the scale empty at weigh-out, the
indicator automatically assigns the lesser (empty
truck) weight as the tare. Value swapping is available
in Modes 1, 2, 3, and 4.
To select a truck in/out mode, press the setup switch to
enter setup mode. Use the navigation keys to go to the
PROGRM menu, then to the TARE100 submenu.
Figure 7-1 shows the structure of the TARE100
submenu.
MODE 4 MODE 5 MODE 6
key.
TARE
Truck Modes 53