Rice Lake IQ plus 710 Installation Manual page 49

Command
SETPOINT Setpoint number
KIND Setpoint kind
VALUE Setpoint value
PSHTARE Push tare
PSHPRINT Push print
PSHACCM Push accumulate
Discontinued Product
TRIP Trip
BANDVAL Band value
HYSTER Hysteresis
ALARM Alarm
PREACT Preact
PREVAL Preact value
BATCH Batch step enable
NAME Setpoint name number
ACCESS Setpoint access
DIGOUT Digital output
RELNUM Relative setpoint numer
START Starting setpoint
END Ending setpoint
BATCHNG Batching mode
Command
GFMT Gross demand print format string
NFMT Net demand print format string
SPFMT Setpoint print format string
TRWIN Truck weigh-in print format string
TRWOUT Truck weigh-out print format string
EDPFMT EDP demand print format string
HDRFMT Ticket header format string
Command
DON#nn Set digital output nn on (active)
DON#0 Set all digital outputs on (active)
DOFF#nn Set digital output nn off (inactive)
DOFF#0 Set all digital outputs off (inactive)
For commands ending with "#nn", nn is the digital output (01–8) being set on or off.
Description
1–20
OFF, GROSSSP, NETSP, +RELSP, –RELSP, %RELSP, PAUSE,
DELAY, WAITSS, COUNTER, AUTOJOG, COZ, INMOTON,
INRANGE, –GROSS, –NET, BATCHPR, TIMER, CONCUR
number
OFF, ON
OFF, ON, WAITSS
OFF, ON, ONQUIET
HIGHER, LOWER, INBAND, OUTBAND
number
number
OFF, ON
OFF, ON, LEARN
number
OFF, ON
NONE, 1–60
OFF, ON, HIDE
NONE, 1–8
1–20
1–20
1–20
OFF, AUTO, MANUAL
Table 5-8. SETPNTS EDP Commands
Description
See Section 6.0 on page 49 for detailed information
Table 5-9. PFORMT EDP Commands
Table 5-10. DIG OUT EDP Commands
Values
Values
Description
EDP Commands 45