Mail Processing; Envelopes With Autofeed Sealer (Except Batch Mode); Envelopes With Dynamic Scale In Batch Mode; With The Feed Platform Alone - Neopost IJ70 Manual

4.
Place a stack of envelopes on the feed platform, select the value
for the rate required and press key
To stop the envelope feeding, press key
a few seconds until the machine stops automatically when there
are no more envelopes to be processed).
- Place an envelope or a stack of envelopes on the feed platform
- Press
- Press
To stop the batch, press key
seconds until the machine stops automatically when there are no
more envelopes to be processed).
Press key
envelope at a time on the platform, with its upper edge resting
4149884V/A
15/10/2010

MAIL PROCESSING

4.2.1 Envelopes with Autofeed Sealer (except batch
mode)

4.2.2 Envelopes with dynamic scale in batch mode

START
and press key
STOP
calculator defines the corresponding value and displays it.
to confirm (or
OK
START
: the whole envelope series is printed at the
STOP
defined value.

4.2.3 With the feed platform alone

START
to start the franking machine. Place one
STOP
40 Entering Postage Value and Mail Processing
START
.
STOP
START
STOP
: the first envelope is weighed. The rate
to cancel).
ESCAPE
START
again (or wait for a few
STOP
ORIG0473-40
again (or wait for