Table of Contents
Advertisement
| Page 213 | Nov-12-2015 10:25 |
Cleaning the Feeder Belts and Rollers
Follow the steps below to clean the belts and rollers of the feeder.
How to Clean the Feeder Belts and Rollers
To clean the feeder belts and rollers:
1.
Open the Auto-Feeder cover, press the upper blue handle to raise the drive assembly.
(without sealer)
(with sealer)
2.
Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.
3.
Push down the upper drive assembly until it locks back into position and close the
feeder cover.
10
213
Advertisement
Chapters
Table of Contents
