When "Switch The Machine Off" Is Displayed; When The Print Output Is Not As You Expected; When No Notification Is Received - Xerox 4112 System Administration Manual

There is another device on the
network with an identical device
name.
The NetWare port is not
functioning.
*:Refer to NetWare Online Documentation for configuration and operations.

When "Switch the machine off" is displayed

A NetWare problem occurred.

When the print output is not as you expected

The print language of the print
data and the print language
configured on the machine are
different.

When no notification is received

The possible causes, check points, and remedies when no notification is received on the
computer which submitted a print job are as follows:
Downloaded From ManualsPrinter.com Manuals
Cause
Switch off the machine and use
NWADMIN from a computer to
confirm that the status of the
printer object is "Standby."
Print out Printer Settings List to
confirm if the network number is
left to "0000000" (NetWare
server down) if using IPX/SPX. If
using TCP/IP, confirm if the IP
address is left to "0.0.0.0" (static
address unspecified, or the
DHCP server is down).
Cause
Not applicable
Cause
Confirm the print language
on the machine.
Check point
Use the "CentreWare Utilities"
CD-ROM from a computer to set
a different device name.
For the case of IPX/SPX, start
the NetWare server. For the case
of TCP/IP, either set a static IP
address or start the DHCP
server.
Check point
Restart the machine.
Switch the machine on after the
display completely disappears.
Check point
Match the print language of the
print data and the print language
configured on the machine.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Troubleshooting
Remedy
Remedy
Remedy
10-7