Xerox 4112 System Administration Manual page 237

Offset Stacking (Middle Right Tray)
Select the default offset stacking option for the finisher tray:
•
•
•
Auto Job Promotion
This Other Settings option allows you set the machine to automatically promote a job for
printing/copying if the machine is unable to start a prior job. For example, the machine is
unable to start an operation because there is no paper in the tray (at the start of a copy or print
operation). If this feature is enabled, then the machine can bypass the current job and allows
other jobs to start.
Tip
The other jobs must not have the same copy/print requirements as the faulted job. If other
jobs have different copy/print requirements, then these other jobs can be promoted and
copied/printed.
Downloaded From ManualsPrinter.com Manuals
None: If this option is selected, the finishing tray will not offset any output.
Offset per set: If this option is selected, the finishing tray will offset each set of a copy/
print job. This option also offsets each job.
3 sets of a job
Offset per job: If this option is selected, all the sets of a job are delivered on one stack to
the output area. When the next job starts, that job is offset from the previous job in the
tray. This option does not offset each set of a job.
Job 1
(with stacked sets)
3 sets
of a
job
3 sets of another job
Job 2
(with stacked sets)
Xerox 4112/4127 Copier/Printer
System Administration Guide
Setups
9-79