Xerox 4112 System Administration Manual page 347

Digital Certificate
To enable a digital certificate (if needed):
1. Click the Properties tab.
2. Click the Security folder, then the Machine Digital Certificate Management link.
3. If prompted to login, type or enter your System Administrator user name and password:
4. Click the Create New Self Signed Certificate button. The Machine Digital Certificate
5. In the Self -Signed Certificate area, click Apply.
SSL
To enable SSL:
1. Click the Properties tab.
2. Click the Security folder, then the SSL/TLS Settings link.
3. If prompted, type or enter your System Administrator user name and password.
4. In the SSL/TLS Settings area, on the HTTP - SSL/TLS Communication line, click Enabled.
5. Click Apply.
Ports
To enable the ports:
1. Click the Properties tab.
2. Click the Connectivity folder, then Port Settings.
3. On the SNMP line, click Enabled.
4. On the SMB line, click Enabled.
5. On the FTP Client line, click Enabled.
6. On the SOAP line, click Enabled.
7. Click Apply.
Downloaded From ManualsPrinter.com Manuals
• user name (default): 11111
• password (default): x-admin
Management page refreshes and displays the Self -Signed Certificate area.
• user name (default): 11111
• password (default): x-admin
Note
If changes are made to the SSL settings you may need to:
• Reboot the system.
• Close and reopen the client browser.
Note
If changes were made to the SSL settings you may need to reboot the system.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Options
11-3