Xerox 4112 System Administration Manual page 185

Custom Size
When setting a non-standard size for trays 3 and 4, set the size in the X (horizontal) direction
within the range of 182-488 mm (7.17-19.21 in.) and in the Y (vertical) direction within the
range 148-330 mm (5.82-13 in.) in 1 mm increments. For optional trays 6 and 7, set the size in
the X direction within the range 210-241 mm (8.26-9.48 in.) and in the Y direction within the
range 297-330 mm (11.69-12 in.) in 1 mm increments.
1. From the Paper Size screen, select Save to save the paper size and return to previous
2. Select either Paper Type or Save.
3. When selecting Paper Type, keep the following in mind:
Downloaded From ManualsPrinter.com Manuals
screen.
• If you select Save, you are returned to the Paper Tray Attributes screen. Proceed to
Step 7. on page 9-25
• If you select Paper Type, proceed to the next step.
• For trays 1, 2, and optional 6 and 7 you can select from six paper types and from
custom paper types 1-5.
• For trays 3 and 4 you can select from seven paper types, and from custom paper types
1-5.
• In tray 5 (Bypass) you can select from eleven paper types and from custom paper types
1-5.
• If the optional OHCF (tray 6) is installed, an additional Paper Type option, Coated
Stock is available.
a. Select the desired Paper Type for this specific tray. (For this procedure, Tray 4 is
shown.)
b. Select Save to save the Paper Type and return to the previous screen.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Setups
9-27