Xerox 4112 System Administration Manual page 276

Setups
Use the following procedure to assign default magnification levels to the Reduce/Enlarge
buttons.
1. From the Copy Service Settings screen, select Reduce/Enlarge Presets.
2. Select the item to be set or changed, and select Change Settings.
Note
Select s to display the previous screen and select t to display the next screen.
3. Select the desired setting for that R/E Preset.
4. Select Save; you are returned to the Reduce/Enlarge Presets screen.
5. Repeat Steps 1-4 until you have assigned a magnification level to each of the R/E Presets.
6. Select Close to return to the Copy Service Settings screen.
9-118
Downloaded From ManualsPrinter.com Manuals
System Administration Guide
Xerox 4112/4127 Copier/Printer