Setups
Port Settings
Select the interface by which the machine is connected to the client. In Port Settings, you can
set the following items:
LPD
NetWare
SMB
IPP
EtherTalk
Bonjour
Port9100
SNMP
FTP Client
Protocol Settings
Select the parameters that are required for communications between the machine and client
workstations. In Protocol Settings, you can set the following items.
Ethernet Rated Speed
TCP/IP - IP Mode
IPv4 - IP Address Resolution
IPv4 - IP Address
IPv4 - Subnet Mask
IPv4 - Gateway Address
IPv4 - IP Filter
Machine E-mail Address/Host Name
Select the e-mail address and host name for this machine. In Machine E-mail Address/Host
Name, you can set the following items:
1. E-mail Address
2. Machine Name
3. Host Name
4. Domain Name
9-120
Downloaded From ManualsPrinter.com Manuals
Receive E-mail
Send E-mail
E-mail Notification Service
UPnP Discovery
WSD
Internet Services (HTTP)
SOAP
WebDAV
System Administration Guide
Xerox 4112/4127 Copier/Printer
IPv6 Address Manual Configuration
Manually Configured IPv6 Address
Manually Configured IPv6 Address Prefix
Manually Configured IPv6 Gateway
Automatically Configured IPv6 Address
IPv6 - IP Filter