4.10.1.2 8254E Cutting media when the Media Cut menu is set to "Manual"
1. Feed the roll media to the media cut position after printing.
•
"Manual Cut -> ENTER" displays in the control panel.
•
Pay attention to the following points when you cut roll media. Mishandling the
razor blade may cause a cut on your finger or hand.
•
When you hold media, do not place your finger on the media cut groove.
•
Move the razor blade along the media cut groove.
2. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
No.
1
2
3
The cutting roll media operation is complete.
8254E / 8264E User Guide
Media guide
Media cut groove
Razor blade
Name
4 Handling The Printer
165