Xerox 4112 System Administration Manual page 260

Setups
Edge Erase - Bottom Edge
Select the default setting for the amount of edge that is erased from the original in the bottom
direction. Select from 0-50 mm in 1 mm increments.
Edge Erase - Left Edge
Select the default setting for the amount of edge that is erased from the original in the left
direction. Select from 0-50 mm in 1 mm increments.
Edge Erase- Right Edge
Select the default setting for the amount of edge that is erased from the original in the right
direction. Select from 0-50 mm in 1 mm increments.
Edge Erase- Side 2
Select the default setting for Independent Shift or Mirror Side 1.
Image Shift
Select the default setting for Side 1 output. Select from the following options: No Shift or
Auto Center.
Image Shift - Side 2
Select the default setting for Independent Shift or Mirror Side 1.
Image Rotation
Select the default setting for Image Rotation. Select from Always On, On during Auto, or Off.
Image Rotation - Rotation Direction
Select the default settings for Image Rotation - Rotation Direction. Select either Staple
Position or Portrait Original - Left Edge.
Original Orientation
Select the default setting from either Upright Images or Sideways Images (Top to Left).
9-102
Downloaded From ManualsPrinter.com Manuals
System Administration Guide
Xerox 4112/4127 Copier/Printer