Xerox 4112 System Administration Manual page 82

Using the Scan Service
Link a job flow sheet to a folder
Set or change a link to a job flow, or select and run a job flow.
The procedure that follows describes how to register a folder on the machine.
1. Enter the System Administrator Mode (Chapter 1 Entering the System Administrator mode
2. Select Setup Menu.
3. Select Create Folder.
4. Select a box to register and then select Create/Delete.
5-4
Downloaded From ManualsPrinter.com Manuals
on page 1-10.)
System Administration Guide
Xerox 4112/4127 Copier/Printer