Xerox 4112 System Administration Manual page 42

Using CentreWare Internet Services
6. Set the Printer Server Name.
7. Set the Fileserver Name.
8. Set the Poling Interval.
9. Set the Number of Searches.
10. Set the Password.
11. Select the Enable check box to enable the TBCP Filter.
12. Set the NDS Tree Name.
13. Set the NDS Context Name.
14. Select a frame type from the Transport Protocol - Frame Type pull-down menu.
15. Select the Enable check box to enable SLP - Active Discovery.
16. Reflect the values as the machine's setting values.
3-8
Downloaded From ManualsPrinter.com Manuals
Note
Set this item only when the operation mode is in Bindery Service.
a. Enter the Password.
b. Re-enter the same password in the Re-enter Password field.
Note
The TBCP Filter checkbox will have a checkmark in it indicating that the TBCP Filter is
enabled.
Note
Set this item only when the operation mode is in Directory Service.
Note
Set this item only when the operation mode is in Directory Service.
a. Click the Apply New Settings. A screen to enter the user name and password will be
displayed.
Enter the System Administrator UserID and password into User Name and Password,
b.
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
Click Reboot. The machine will reboot and the setting value will be reflected.
d.
System Administration Guide
Xerox 4112/4127 Copier/Printer