Ldap - Xerox 4112 System Administration Manual

Using CentreWare Internet Services
7. Set the End of Job Timeout.
8. Reflect the values as the machine's setting values.

LDAP

This section describes the settings for the LDAP port.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the
4. Click + on the left of LADP Folder to display the items in the folder.
3-16
Downloaded From ManualsPrinter.com Manuals
Click the Apply New Settings. A screen to enter the user name and password will be
a.
displayed.
b. Enter the System Administrator UserID and password into User Name and Password,
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
computer on page 3-2).
folder.
System Administration Guide
Xerox 4112/4127 Copier/Printer