Banner Sheet - Xerox 4112 System Administration Manual

Setups

Banner Sheet

Select whether or not the banner sheets will be used to separate different output jobs. Select
one of the following:
•
•
•
•
Note
Even if the stapler feature is enabled, banner sheets are not stapled.
Note
On a print job from a Macintosh, the document name does not appear on the banner sheet.
Note
When printing banner sheets, they are counted for metering purposes.
Banner Sheet Offset
Select whether or not to offset the banner sheet from the rest of the printed set. Select Offset
or No Offset.
Banner Sheet Tray
Select the paper tray from which the banner sheets are printed. Select one of the following
trays: 1, 2, 3, 4, or optional 6 and 7.
Separator Tray
Select the paper tray from which separator pages are inserted from. Select one of the following
trays: 1, 2, 3, 4, 5, 6, 7, and 8.
PostScript Paper Supply
Select whether or not to enable the PostScript DMS (Deferred Media Selection) feature. Select
either Auto or Select Paper Tray.
PostScript Font Absence
Select how the machine will handle a specified PostScript font that is not loaded on the
machine.
•
•
PostScript Font Substitution
When a PostScript font specified in a job is not present, select whether or not to use ATCx for the
substitute font.
9-136
Downloaded From ManualsPrinter.com Manuals
Off: Do not print banner sheets.
Start Sheet: Print a banner sheet before a print job.
End Sheet: Print a banner sheet after a print job.
Start Sheet & End sheet: Print a banner sheet both before and after a print job.
Cancel Printing: This selection cancels the job without printing it.
Substitute Font and Print: This selection continues printing the job and uses a substitute
font in place of the missing font.
System Administration Guide
Xerox 4112/4127 Copier/Printer