Maximum Login Attempts - Xerox 4112 System Administration Manual

Accounting and Authentication/Security Settings

Maximum Login Attempts

You can set the number of attempts a person is allowed to enter the same System
Administrator's Login ID after which access to the system will be disabled.
Set the number of authentication attempts allowed between 1-10.
Note
The count is reset when the machine is restarted.
Note
To cancel the access rejection, shut down the machine by switching off the power and switching
it on again.
1. Logon as System Administrator and select the Machine Status button.
2. From the Tools tab, select Authentication/Security Settings.
3. Select Authentication > Maximum Login Attempts by System Administrator.
4. Select from:
Passcode Policy
When On is selected, a passcode must be entered for local account login.
However, a passcode must always be entered when accessing either remotely or from the
network.
1. Logon as System Administrator and select the Machine Status button.
2. From the Tools tab, select Authentication/Security Settings.
3. Select Authentication.
4. Select Passcode Policy.
5. Select Change Settings.
8-32
Downloaded From ManualsPrinter.com Manuals
• Unlimited Attempts
• Limit Attempts: Enter a number from 1-10 using the
System Administration Guide
Xerox 4112/4127 Copier/Printer
and and then select Save.