Xerox 4112 System Administration Manual page 272

Setups
2 Sided Scanning Options
Select the default settings for 2 Sided Scanning Options. Select either 2 Sided Simultaneous
Scan or 1 Sided Scan.
Auto Paper Off
Select the default tray that will be used when the Auto feature (on the Paper Supply, Basic
Copying screen) is canceled because the Auto% or the Independent X-Y% feature (on the
Reduce/ Enlarge, Basic Copying screen) is selected. Select from Trays 1-4 or optional Trays 6-
7.
Mixed Size Originals - 2 Sided Copy
Select the default setting that affects the 2-sided originals. Select either Copy to new sheet or
Copy to Side 2.
Fine-tune 100%
The fine-tune value is applied to documents that are placed on the Document Glass for copying
and the either 100% for Basic Copying (Reduce/Enlarge) or Preset%, 100% is selected. Set the
value in the X/Y direction within the range 98 to 102% in 0.1% increments.
Tip
This feature is not applied if any other Reduce/Enlarge percentage is selected.
Use the following procedure to select a default fine tune setting.
1. Select Fine-tune 100%, and select Change Settings.
2. Enter the desired fine-tune value by using s, t,
3. Select Save to save the changes and return to the Copy Control screen.
Pseudo-Photo Gradation Mode
Select the default toning method for photo originals. To obtain an image quality that is closer
to the photo image, select how gray tones will be handled by the machine. Select either Error
Diffusion or Dither.
9-114
Downloaded From ManualsPrinter.com Manuals
System Administration Guide
Xerox 4112/4127 Copier/Printer
, and .