Abnormal Noise And Electrical Problems; Abnormal Noise When Power Is Turned On - Xerox Phaser 6130 Service Manual

General Troubleshooting

Abnormal Noise and Electrical Problems

Abnormal Noise When Power is Turned On

4-44
Troubleshooting Reference Table
Applicable Parts
Imaging Unit (PL4.1.21)
Fuser (PL6.1.1)
Transfer Unit (PL6.1.7)
Sub Drive Assembly (PL7.1.1)
Main Drive Assembly (PL7.1.2)
Troubleshooting Procedure Table
Step Actions and Questions
Perform the Main Motor test (page 4-27):
1
Service Mode > Engine Diag
> Main Motor FULL2.
Is the noise still present?
2 1. Reseat the Imaging Unit.
2. Perform the Main Motor test (page 4-27):
Service Mode >
Test > Main Motor
Is the noise still present?
1. Reseat the connectors on the Transfer
3
Unit.
2. Perform the Main Motor test (page 4-27):
Service Mode >
Test > Main Motor
Is the noise still present?
4 1. Reseat the Main Drive Assembly.
2. Perform the Main Motor test (page 4-27):
Service Mode >
Test > Main Motor
Is the noise still present?
5 Perform the Sub Motor test (page 4-28):
Service Mode > Engine Diag
> Sub Motor FULL2.
Is the noise still present?
Wiring and Plug/Jack Map References
Yes
Go to step 2.
> Motor Test
Go to step 3.
Engine Diag > Motor
FULL2.
Go to step 4.
Engine Diag > Motor
FULL2.
Try replacing
one after
another:
Engine Diag > Motor
FULL2.
Unit
(page 8-8)
Unit
(page 8-41)
Assembly
(page 8-52).
Go to step 6.
> Motor Test
Phaser 6130 Color Laser Printer Service Manual
No
Go to step 5.
Complete
Complete
Complete
Imaging
Transfer
Main Drive
Check the
installation
situation of
printer.