Xerox 4112 System Administration Manual page 354

Options
14. For the HTTP or HTTPS Server Names, provide a name of up to 255 characters in length for
15. Leave the Port Number set to 8080 (the Internet Assigned Network Authority [IANA]
16. Click Apply and supply the administrator User Name and Password, if prompted. The
17. If necessary to see the list of Registration hot links again, click your browser Back button, or
11-10
Downloaded From ManualsPrinter.com Manuals
one or both of these Proxy Servers. A fully qualified domain name or IP address can be
used. Note: Make sure that DNS is enabled as stated in the TCP/IP Protocol Configuration
topic in the NOS Selection section of this guide.
recognized proxy port) unless you are using a different port number.
default is 11111 and x-admin. You should a message stating: Settings Have Been Changed
click on the Registration link.
System Administration Guide
Xerox 4112/4127 Copier/Printer