Xerox 4112 System Administration Manual page 143

Failed Access Log
If the number of times that authentication fails within a set time exceeds the Failed Attempts
value set here, then an error is logged. You can set the failing times within the range from 1 to
600. To enable the setting:
•
•
•
•
Display Login Status
This option allows you to enable the Login Status to be displayed in the top right corner of the
screen.
•
•
Logout Confirmation Screen
This option allows you to enable a confirmation screen when users logout.
•
•
•
User ID for Login
You can set the User ID for Login to be Non-case Sensitive. The default setting is Case Sensitive.
•
•
•
Downloaded From ManualsPrinter.com Manuals
Select Change Settings.
Select On.
Using the controller keypad, enter the maximum number of system consecutive access
attempts that will be allowed before it is logged as an error.
Select Save.
Select Enabled
Select Disabled
Select Change Settings.
Select Enabled.
Select Save.
Select Change Settings
Select Non-Case Sensitive.
Select Save.
Accounting and Authentication/Security Settings
Xerox 4112/4127 Copier/Printer
System Administration Guide
8-31