Xerox 4112 System Administration Manual page 335

Job transmission to the print
queue is prohibited.
Job sender (user or group name)
is not specified in the user
setting for the print server.
The print queue where the user
has transmitted the print data, is
not assigned to the machine.
Print data format and the print
environment settings on the
computer do not match.
The number of print queues set
for the machine exceeds the
maximum number of supported
queues on the machine.
The slave file server is not
configured. (Bindery Service
mode.)
Printer types do not match.
Downloaded From ManualsPrinter.com Manuals
Cause
Use PCONSOLE to confirm if
User can register to the queue
is set to Yes under Current
Queue Status of the Print
Queue Information.
Use NWADMIN on the computer
to confirm if the Identifier of
the print queue has the operator
class option checked.*
Use NWADMIN from a computer
to confirm that the User
information for the Print Server
lists the job sender (user or group
name).*
Use NWADMIN from a computer
to check the print queue
Assignment to see if the
machine is in the printer list
serviced by the print queue.*
-
Use NWADMIN from a computer
to check the Assignment print
queue list on the machine to see
if the desirable print queue is
assigned to the machine.*
Use PCONSOLE from a computer
to confirm if the slave file server
is registered to the Service
NetWare Server on the print
server indicated by the Print
Server Information.*
Use PCONSOLE from a computer
to confirm if the printer type is
set to parallel, port is set to LPT1,
and location is set to automatic
mode (local) under Print Server
Information/Printer/Printer xxx
Environment Configuration.*
Check point
Use PCONSOLE to set the item
to Yes.
Use NWADMIN on a computer
to confirm if the Identifier of
the print queue has each item
of the operator class option
checked.*
Re-transmit the print data to the
print queue whose User of the
Print Server Information
includes the job sender (user or
group name).
Use NWADMIN from a
computer to register job sender
(user or group name) to the
User information of the print
server.*
Re-transmit the print data to the
print queue which is assigned to
the machine.*
Use NWADMIN from a
computer to add the print
queue to the machine.*
If the computer is running
Windows, ensure that it is set to
not output Ctrl-"D."
Re-transmit the print data to the
print queue which is assigned to
the machine.*
Use PCONSOLE from a
computer to register the slave
file server and propagate the
configuration parameters.
Use PCONSOLE from a
computer to set the printer type
to parallel, port to LPT1,
location to automatic mode
(local), and propagate the
configuration parameters.*
Xerox 4112/4127 Copier/Printer
System Administration Guide
Troubleshooting
Remedy
10-5