Tcp/Ip - Xerox 4112 System Administration Manual

TCP/IP

This section describes the settings for TCP/IP.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the
4. Click TCP/IP.
5. Set the Host Name.
6. Select how to obtain an IP address from the Get IP Address pull-down menu.
7. Set the IP Address.
8. Set the Subnet Mask and Gateway Address.
Downloaded From ManualsPrinter.com Manuals
computer on page 3-2).
folder.
Note
This item is not necessary if either DHCP, BOOTP, RARP, or DHCP/Autonet has been
selected from the Get IP Address pull-down menu.
Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer
System Administration Guide
3-9