Xerox 4112 System Administration Manual page 229

Setups
4. Press Save.
5. Check the output sample, and measure the A and B fold position movement amounts.
A
B
6. Enter the measurement value you obtained in the previous step in Values A & B Before
Adjustment, and the final value you want after adjustment in Desired Values A & B.
Tip
Set value B so that an edge of the paper does not extend past a fold position of the paper. An
edge of paper extending past a fold position of the paper may cause a paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment results.
8. Make adjustments again if necessary. (Step 6)
9. Press Save.
Xerox 4112/4127 Copier/Printer 9-71
System Administration Guide
Downloaded From ManualsPrinter.com Manuals