Table 26: Global Policy Parameters: Localization; Table 27: Global Policy Parameters: Phone Settings; Figure 63: Global Policy Categories - Grandstream Networks UCM6102 User Manual

The following tables list the Global Policy configuration parameters for the SIP end device.
Language settings
Language
Date and Time
Date Format
Time Format
NTP Server
Time Zone
Default Call Settings
Dial Plan
Enable Call Features
Use # as Dial Key
Firmware Version 1.0.9.26

Figure 63: Global Policy Categories

Table 26: Global Policy Parameters: Localization

Select the LCD display language on the SIP end device.
Configure the date display format on the SIP end device's LCD.
Configure the time display in 12-hour or 24-hour format on the SIP end
device's LCD.
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
Configure the time zone used on the SIP end device.

Table 27: Global Policy Parameters: Phone Settings

Configure the default dial plan rule. For syntax and examples, please
refer to user manual of the SIP devices to be provisioned for more details.
When enabled, "Do Not Disturb", "Call Forward" and other call features
can be used via the local feature code on the phone. Otherwise, the ITSP
feature code will be used.
If set to "Yes", pressing the number key "#" will immediately dial out the
input digits.
UCM6100 Series IP PBX User Manual Page 97 of 305