Change Log; Firmware Version 1.0.9.26; Firmware Version 1.0.9.25; Firmware Version 1.0.9.23 - Grandstream Networks UCM6102 User Manual

This section documents significant changes from previous versions of the UCM6100 user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.

FIRMWARE VERSION 1.0.9.26


Added Announcements Center [ANNOUNCEMENTS CENTER]

FIRMWARE VERSION 1.0.9.25


Added UCM Zero Config model templates for provisioning GXP2200EXT coupled with GXV3240.
[MODEL TEMPLATES]

Added ability to select the voicemail storage (Support Email + WAV). [VOICEMAIL EMAIL
SETTINGS]

FIRMWARE VERSION 1.0.9.23


Added SSH enable/disable option in LCD or WEB [SSH ACCESS]

Added remote peer extensions in Ring Group [REMOTE EXTENSION IN RING GROUP]

Added ability to prepend digits in inbound routes [Table 58: Inbound Rule Configuration
Parameters]

Added ability to search extensions on Extension page. [SEARCH AND EDIT EXTENSION]

Added user portal for users to log in with extension number, access user information, extension
configuration and CDR. [USER PORTAL]

Added support to send Fax via web UI. [FAX SENDING]

Added "Enable LDAP" option to skip the extension from UCM default LDAP phonebook. [Table 34:
SIP Extension Configuration Parameters - Basic Settings]

Added DDNS Support. [DDNS SETTINGS]

Added support for Call Barging using feature codes. [ENABLE SPY]

Added ability to search the CDR by called number. [Table 100: CDR Filter Criteria]

Added ability to select the file types for automatic backup. [BACKUP/RESTORE]

Added automatic backup support on SD Card or USB storage. [BACKUP/RESTORE]

Added support to skip trunk authentication by time condition. [Table 36: SIP Extension
Configuration Parameters - Features]
Firmware Version 1.0.9.26

CHANGE LOG

UCM6100 Series IP PBX User Manual Page 17 of 305