Analog Station: Select FXS port to be assigned to the extension. By default, it's set to "None".
Once selected, analog related settings for this extension will show up in "Analog Settings"
section.
7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.
8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in
step 4 as the default destination.
Firmware Version 1.0.9.26
Figure 126: Configure Extension for Fax Machine
Figure 127: Configure Inbound Rule for Fax
UCM6100 Series IP PBX User Manual
Page 217 of 305