Parking Lot; Table 97: Parking Lot Status; Figure 158: Parking Lot Status - Grandstream Networks UCM6102 User Manual

Other operations are also available in interface status section:

Click on "Interfaces Status", the web page will redirect to ports configuration page which can also be
accessed via web GUI->PBX->Internal Options->Ports Config.

Click on to refresh the interface status.

Click on [ + ] to expand the interface details.

Click on [ - ] to hide the interface details.

PARKING LOT

The UCM6100 supports call park using feature code. When there is call being parked, this section will
display the parking lot status.
Caller ID
Channel
Extension
Timeout
Other operations are also available in parking lot status section:

Click on "Parking Lot", the web page will redirect to feature codes page which can also be accessed
via web GUI->PBX->Internal Options->Feature Codes.

Click on to refresh the parking lot status.

Click on [ + ] to expand the parking lot details.
Firmware Version 1.0.9.26
FXS/FXO not configured.
FXS/FXO disconnected.

Figure 158: Parking Lot Status

Table 97: Parking Lot Status

Display the caller ID who parks the call.
Display channel for the call park.
Display the parking lot number where the call is parked/retrieved.
Display timeout (in seconds) for the parked call. The status page will
dynamically update this timer from 120 seconds (default) to 0. When the timer
reaches 0, the caller who parks the call will be called back.
UCM6100 Series IP PBX User Manual Page 274 of 305