Table 30: Global Policy Parameters: Network Settings - Grandstream Networks UCM6102 User Manual

1ghz arm cortex a8 application processor, 512mb ddr ram, 4gb nand flash
Hide thumbs Also See for UCM6102:
Table of Contents

Advertisement

Web Access
Admin Password
End-User Password
Web Access Mode
Web Server Port
Security
Disable Telnet/SSH
Syslog
Syslog Server
Syslog Level
Send SIP Log
Basic Settings
IP Address
Advanced Setting
Layer 3 QoS
Layer 2 QoS Tag
Layer 2 QoS Priority Value
STUN Server
Keep Alive Interval
Firmware Version 1.0.9.26
Configure the administrator password for admin level login.
Configure the end-user password for the end user level login.
Select HTTP or HTTPS as the web access protocol.
Configure the port for web access. The valid range is 1 to 65535.
Enable Telnet/SSH access for the SIP end device. If the SIP end device
supports Telnet access, this option controls the Telnet access of the
device; if the SIP end device supports SSH access, this option controls
the SSH access of the device.
Configure the URL/IP address for the syslog server.
Select the level of logging for syslog.
Configure whether the SIP log will be included in the syslog message.

Table 30: Global Policy Parameters: Network Settings

Configure how the SIP end device shall obtain the IP address. DHCP or
PPPoE can be selected.
DHCP
Once selected, users can specify the Host Name (option 12) of the
SIP end device as DHCP client, and Vendor Class ID (option 60)
used by the client and server to exchange vendor class ID
information.
PPPoE
Once selected, users need specify the Account ID, Password and
Service Name for PPPoE.
Define the Layer 3 QoS parameter. This value is used for IP Precedence,
Diff-Serv or MPLS. Valid range is 0-63.
Assign the VLAN Tag of the Layer 2 QoS packets. Valid range is 0 -4095.
Assign the priority value of the Layer 2 QoS packets. Valid range is 0-7.
Configure the IP address or Domain name of the STUN server. Only
non-symmetric NAT routers work with STUN.
Specify how often the phone will send a blank UDP packet to the SIP
server in order to keep the "ping hole" on the NAT router to open. Valid
range is 10-160.
UCM6100 Series IP PBX User Manual
Page 102 of 305

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ucm6104Ucm6108Ucm6116

Table of Contents