Restore Configuration From Backup File; Table 104: Data Sync Configuration - Grandstream Networks UCM6102 User Manual

Enable Backup
Account
Password
Server Address
Backup Time
Before saving the configuration, users could click on "Test Connection". The UCM6100 will then try
connecting the server to make sure the server is up and accessible for the UCM6100. Save the changes
and all the backup logs will be listed on the web page. After data sync is configured, users could also
manually synchronize all data by clicking on
interval to come.

RESTORE CONFIGURATION FROM BACKUP FILE

To restore the configuration on the UCM6100 from a backup file, users could go to Web
GUI->Maintenance->Backup->Local Backup.

A list of previous configuration backups is displayed on the web page. Users could click on
desired backup file and it will be restored to the UCM6100.

If users have other backup files on PC to restore on the UCM6100, click on "Upload Backup File" first
and select it from local PC to upload on the UCM6100. Once the uploading is done, this backup file will
be displayed in the list of previous configuration backups for restore purpose. Click on
from the backup file.
Firmware Version 1.0.9.26

Table 104: Data Sync Configuration

Enable the auto backup function. The default setting is "No".
Enter the Account name on the SFTP backup server.
Enter the Password associate with the Account on the SFTP backup
server.
Enter the SFTP server address.
Enter 0-23 to specify the backup hour of the day.
UCM6100 Series IP PBX User Manual
instead of waiting for the backup time
Page 295 of 305
of the
to restore