Figure 81: Manage Extensions - Grandstream Networks UCM6102 User Manual

"Edit" , "Reboot"
specifying the extension number to find an extension quickly.

Status
Users can see the following icon for each extension to indicate the SIP status.
Green:
Blue:
Yellow:
Grey:

Edit single extension
Click on to start editing the extension parameters.

Reboot the user
Click on to send NOTIFY reboot event to the device which has an UCM6100 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6100 web
GUI->PBX->Zero Config->Auto Provisioning Settings.

Delete single extension
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".

Modify selected extensions
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.

Delete selected extensions
Firmware Version 1.0.9.26
and "Delete" are available per extension. User can search an extension by

Figure 81: Manage Extensions

Free
Ringing
In Use
Unavailable (the extension is not registered or disabled on the PBX)
UCM6100 Series IP PBX User Manual Page 142 of 305