Grandstream Networks UCM6102 User Manual page 199

Permission
Custom Prompt
Ring Timeout on Each Member
Auto Record
Enable Destination
Secret
Email Address
Firmware Version 1.0.9.26
Configure the permission level for Ring Group. This permission will take
effect when an incoming call is going to be directed to an external number
configured as "Default Destination". The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level.
This option is to set a custom prompt for a ring group to announce to
caller. Click on 'Prompt', it will direct to the page PBX->Internal
Options->Custom Prompt, where users could record new prompt or
upload prompt files.
Configure the number of seconds to ring each member. If set to 0, it will
keep ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has ring
timeout settings as well.
If enabled, calls on this ring group will be automatically recorded. The
default setting is No. The recording files can be accessed from web
GUI->CDR->Recording Files.
If enabled, users could select extension, voicemail, ring group, IVR, call
queue, voicemail group as the destination if the call to the ring group has
no answer. Secret and Email address are required if voicemail is selected
as the destination.
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Configure the Email address of the ring group extension's voicemail. If
"Attach Recordings
GUI->PBX->Voicemail->Voicemail Email Settings, the voicemail can
be sent to the ring group's Email address as attachment.
UCM6100 Series IP PBX User Manual
to E-mail" is enabled from Web
Page 198 of 305