Voicemail; Configure Voicemail; Table 62: Voicemail Settings - Grandstream Networks UCM6102 User Manual

CONFIGURE VOICEMAIL

If the voicemail is enabled for UCM6100 extensions, the configurations of the voicemail can be globally set
up and managed under Web GUI->PBX->Call Features->Voicemail.
Max Greeting
Dial '0' For Operator
Max Messages Per Folder
Max Message Time
Min Effective Message Time
Announce Message Caller-ID
Firmware Version 1.0.9.26

VOICEMAIL

Table 62: Voicemail Settings

Configure the maximum number of seconds for the voicemail greeting.
The default setting is 60 seconds.
If enabled, the caller can press 0 to exit the voicemail application and
connect to the configured operator's extension. The operator extension
can be configured under web GUI->PBX->Internal Options->General.
Configure the maximum number of messages per folder in users'
voicemail. The valid range 10 to 1000. The default setting is 50.
Select the maximum duration of the voicemail message. The message
will not be recorded if the duration exceeds the max message time. The
default setting is 15 minutes. The available options are:

1 minute

2 minutes

5 minutes

15 minutes

30 minutes

Unlimited
Configure the minimum duration (in seconds) of a voicemail message.
Messages will be automatically deleted if the duration is shorter than the
Min Message Time. The default setting is 3 seconds. The available
options are:

No minimum

1 second

2 seconds

3 seconds

4 seconds

5 seconds
Note:
Silence and noise duration are not counted in message time.
If enabled, the caller ID of the user who has left the message will be
announced at the beginning of the voicemail message. The default setting
UCM6100 Series IP PBX User Manual Page 191 of 305