Access Voicemail; Table 63: Voicemail Ivr Menu - Grandstream Networks UCM6102 User Manual

Announce Message Duration
Play Envelope
Play from Last
Allow User Review

ACCESS VOICEMAIL

If the voicemail is enabled for UCM6100 extensions, the users can dial the voicemail access feature code
(by default *98 or *97) to access the extension's voicemail. The users will be prompt to enter the voicemail
password and then can enter digits from the phone keypad to navigate in the IVR menu for different
options.
Main Menu Sub Menu 1
3 - Advanced options
1 - New
5 - Repeat the current message
messages
7 - Delete this message
8 - Forward the message to another user
9 – Save
* - Help
# - Exit
0 - New messages
1 - Old messages
2 - Change
2 - Work messages
folders
3 - Family messages
4 - Friend messages
Firmware Version 1.0.9.26
is "No".
If enabled, the message duration will be announced at the beginning of
the voicemail message. The default setting is "No".
If enabled, a brief introduction (received time, received from, and etc) of
each message will be played when accessed from the voicemail
application. The default setting is "Yes".
If enabled, UCM will play from the voice message left most recently; if
disabled, UCM will play from the earliest left voice message
If enabled, users can review the message following the IVR before
sending the message out. The default setting is "No".

Table 63: Voicemail IVR Menu

UCM6100 Series IP PBX User Manual
Sub Menu 2
1 - Send a reply
2 - Call the person who sent this message
3 - Hear the message envelop
4 - Leave a message
* - Return to the main menu
Page 192 of 305