Join A Conference Call; Invite Other Parties To Join Conference; Figure 101: Conference Invitation From Web Gui - Grandstream Networks UCM6102 User Manual

Play Hold Music
Music On Hold
Skip Authentication When
Inviting User via Trunk from
Web GUI

JOIN A CONFERENCE CALL

Users could dial the conference bridge extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.

INVITE OTHER PARTIES TO JOIN CONFERENCE

When using the UCM6100 conference bridge, there are two ways to invite other parties to join the
conference.

Invite from Web GUI.
For each conference bridge in UCM6100 Web GUI->PBX->Call Features->Conference, there is an icon
for option "Invite a participant". Click on it and enter the number of the party you would like to invite.
Then click on "Add". A call will be sent to this number to join it into the conference.

Invite by dialing 0 or 1 during conference call.
Firmware Version 1.0.9.26
If enabled, the UCM6100 will play Hold music when there is only one user
in the conference. The default setting is "No".
Select the music on hold class to be played in conference call. Music On
Hold class can be set up under web UI->PBX->Internal Options->Music
On Hold.
If enabled, the invitation from Web GUI for a conference bridge with
password will skip the authentication for the invited users. The default
setting is "No".

Figure 101: Conference Invitation From Web GUI

UCM6100 Series IP PBX User Manual Page 181 of 305