Alert Log; Figure 163: System Events->Alert Events Lists: System Reboot; Figure 164: System Events->Alert Events Lists: System Crash - Grandstream Networks UCM6102 User Manual


Detect Cycle: The UCM6100 will check the system reboot based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
4. System Crash

Detect Cycle: The UCM will detect the event at each cycle based on the specified time. Users can
enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Click on the switch
could also select the checkbox for each event and then click on button "Alert On", "Alert Off", "Email
Notification On", "Email Notification Off" to control the alert and Email notification configuration.

ALERT LOG

Under Web GUI->Status->System Events->Alert Log, system messages from triggered system events
are listed as alert logs. The following screenshot shows system crash alert logs.
Firmware Version 1.0.9.26
Figure 163: System Events->Alert Events Lists: System Reboot
Figure 164: System Events->Alert Events Lists: System Crash
to turn on/off the alert and Email notification for the event. Users
UCM6100 Series IP PBX User Manual Page 279 of 305