Table 53: Create New Iax Trunk; Table 54: Iax Register Trunk Configuration Parameters - Grandstream Networks UCM6102 User Manual

1ghz arm cortex a8 application processor, 512mb ddr ram, 4gb nand flash
Hide thumbs Also See for UCM6102:
Table of Contents

Advertisement

CC Settings
Enable CC
CC Max Agents
CC Max Monitors
Type
Provider Name
Host Name
Keep Trunk CID
Username
Password
Disable This Trunk
Basic Settings
Provider Name
Host Name
Keep Trunk CID
Firmware Version 1.0.9.26
modify the remote contacts by adding this prefix.
If enabled, the system will automatically alert the user when a called party
is available, given that a previous call to that party failed for some reason.
Configure the maximum number of CCSS agents which may be allocated
for this channel. In other words, this number serves as the maximum
number of CC requests this channel is allowed to make. The minimum
value is 1.
Configure the maximum number of monitor structures which may be
created for this device. In other words, this number tells how many callers
may request CC services for a specific device at one time. The minimum
value is 1.

Table 53: Create New IAX Trunk

Select the VoIP trunk type.
Peer IAX Trunk
Register IAX Trunk
Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP provider's server of the
trunk.
If enabled, the trunk CID will not be overridden by extension's CID when
the extension has CID configured. The default setting is "No".
Enter the username to register to the trunk from the provider when
"Register IAX Trunk" type is selected.
Enter the password to register to the trunk from the provider when
"Register IAX Trunk" type is selected.
If selected, the trunk will be disabled.

Table 54: IAX Register Trunk Configuration Parameters

Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP provider's server of the
trunk.
If enabled, the trunk CID will not be overridden by extension's CID when
the extension has CID configured. The default setting is "No".
UCM6100 Series IP PBX User Manual
Page 161 of 305

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ucm6104Ucm6108Ucm6116

Table of Contents