# - Cancel
1 - Send a reply
2 - Call the person who sent this message
3 -
Advanced
3 - Hear the message envelop
options
4 - Leave a message
* - Return to the main menu
1 - Record your unavailable message
2 - Record your busy message
0 - Mailbox
options
3 - Record your name
4 - Record temporary greeting
5 - Change your password
* - Return to the main menu
VOICEMAIL EMAIL SETTINGS
The UCM6100 can be configured to send the voicemail as attachment to Email. Click on "Voicemail Email
Settings" button to configure the Email attributes and content.
Attach Recordings to E-Mail
Keep Recordings
Template For Voicemail Emails
Firmware Version 1.0.9.26
Table 64: Voicemail Email Settings
If enabled, voicemails will be sent to user's Email address. The default
setting is "Yes".
If enabled, voicemail will be stored in the UCM6100 after the email is sent.
The default setting is "Yes".
Fill in the "Subject:" and "Message:" content, to be used in the Email
when sending to the user.
The template variables are:
\t: TAB
UCM6100 Series IP PBX User Manual
1 - Accept this recording
2 - Listen to it
3 - Re-record your message
1 - Accept this recording
2 - Listen to it
3 - Re-record your message
1 - Accept this recording
2 - Listen to it
3 - Re-record your message
1 - Accept this recording
2 - Listen to it
3 - Re-record your message
Page 193 of 305