Call Recording; Figure 143: Download Recording File From Cdr Page - Grandstream Networks UCM6102 User Manual

Barge Spy

CALL RECORDING

The UCM6100 allows users to record audio during the call. If "Auto Record" is turned on for an extension,
ring group, call queue or trunk, the call will be automatically recorded when there is established call with it.
Otherwise, please follow the instructions below to manually record the call.
1. Make sure the feature code for "Audio Mix Record" is configured and enabled.
2. After establishing the call, enter the "Audio Mix Record" feature code (by default it's *3) followed by #
or SEND to start recording.
3. To stop the recording, enter the "Audio Mix Record" feature code (by default it's *3) followed by # or
SEND again. Or the recording will be stopped once the call hangs up.
4. The recording file can be retrieved under Web GUI->Status->CDR. Click on
or click on to download the recording file.
The above recorded call's recording files are also listed under the UCM6100 web GUI->CDR->Recording
Files.
Firmware Version 1.0.9.26
This is the feature code to join in on the call to assist both
parties. The default setting is *56.

Figure 143: Download Recording File from CDR Page

UCM6100 Series IP PBX User Manual
to play the recording
Page 247 of 305