Conference Rooms; Table 95: Agent Status; Figure 155: Queue Status; Figure 156: Conference Room Status - Grandstream Networks UCM6102 User Manual

1ghz arm cortex a8 application processor, 512mb ddr ram, 4gb nand flash
Hide thumbs Also See for UCM6102:
Table of Contents

Advertisement

The current call status (caller ID, duration),
(completed/abandoned) are shown for the call queue. The agent status is defined as below.
On the UCM6100, Service Level is defined as the percentage of high-quality calls over all calls in the call
queue, where high-quality call means calls answered within 10 seconds.
Other operations are also available in queue status section:
Click on "Queues", the web page will redirect to call queue configuration page which can also be
accessed via web GUI->PBX->Call Features->Call Queue.
Click on
to refresh the call queue status.
Click on [ + ] to expand the call queue detail.
Click on [ - ] to hide the call queue detail.

CONFERENCE ROOMS

Users could see all the conference room status in this section. It shows all the configured conference
rooms, current users, call duration for each user and conference call.
Firmware Version 1.0.9.26

Figure 155: Queue Status

Table 95: Agent Status

The agent is available/idle.
The agent is ringing.
The agent is talking/busy.
The agent has been logged out.

Figure 156: Conference Room Status

UCM6100 Series IP PBX User Manual
agent status, service
level, calls
summary
Page 272 of 305

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ucm6104Ucm6108Ucm6116

Table of Contents